|
Two
powerful, cost effective, shears which have the ability to accurately
cut PCB laminates, plastics, polymer plates up to 2.00mm thick and
aluminium up to 1.5mm.
An important feature of these shears is safety. Free access to the
cutting area is prevented by heavy Perspex shielding extending along
both sides of the blade. A safety latch is fitted to the pivot to
prevent operation without it first being released. For positional
accuracy the cutting bed is fitted with a rule which is recessed to
assist in securing the PCB or sheeting whilst cutting is in progress.
The 8" Cutter is extremely compact with an overall height of only
575mm and a footprint of 335 X 140mm. It has a cutting bed of 110mm
wide from the blade although wider material can be cut.
The larger 12" Cutter will cut materials up to has a height of
670mm and a footprint of 440 x 245mm. It has a larger cutting bed
225mm wide from the blade although once again wider material can be
cut.
18"
and 25" Shears
Two
bench top shears suitable for cutting printed circuit board
laminates, thin metal sheet and aluminium (1.5/2.0mm) or plastic
labels / front panel materials. On lowering the operating handle, a
spring loaded clamp is activated which holds the material securely
during cutting, thus enabling cuts to be made with a mini-mum of
effort.
These shears are composed of an epoxy powder coated cast aluminium
frame fitted with hardened and ground steel blades. The 18" Model has
a clear acrylic front safety guard to protect the operator, whilst at
the same time making it possible to see the blades so that the
material to be cut can be aligned accurately.
Both , the 18" Cutter and the 25" Cutter have imperial and metric
edge scales and fully adjustable front and back stops for batch work.
Corner
Rounder
An
inexpensive invaluable tool to meet the demand for a quick corner
rounding facility for plastic/metal labels and front panels.
The table is effectively split into two halves, each containing 90
degree stops, in the angle of each is a hardened radius of either 6mm
or 4mm. The punch has been ground to simultaneously marry both of
these rounds when driven down by the cam actioned handle.
The material to be rounded is slid from the left or right hand side
positively into the stops, to leave an overhang which is sheared
through by the punch to leave a clean
corner of either
6mm or 4mm
radius.
It
should be noted that material originally cut out of square will
result in an unbalanced round being removed. The table support column
is mounted on a 5" X 5" steel plate with screw holes for bench
fixing, although this will probably be unnecessary for most users.
Overall height with handle upright 8" (205mm) and weight 1.2Kg.
|
|
The 8" Cutter
costs £165.00+VAT
The 12" Cutter costs £215.00+VAT
Postage and Packing extra.
18"
Cutter costs £410.00+VAT
25" Cutter costs £795.00+VAT
Postage and Packing is extra
Round Corner £140.00+VAT
Postage & Packing is extra.
 |
